Basic Anycubic UV Resin 405nm1KG

Product Description

Professional LCD molding resin. Optimize the formation of a weak LCD light source. The printing efficiency is higher than that of market compatible DLP/LCD/SLA resin. The resin is only designed for the resin LCD model, not recommended for DLP or SLA machines.
High speed solidification. This resin ensures the resistance of the molded parts and a non-excessive shrinkage. It also improves the printing speed, shortens the curing time, and improves the printing efficiency of LCD machines as much as possible.
Strong adhesion of the model and easy to detach after it is formed. It not only brings high printing success and accuracy rate, but also minimizes release force and stickiness. Thus, the model attached to the forming platform can easily be shoveled out, and its low viscosity makes it easier to clean the machine and the model.
The material is rigid and resistant. Solid material in the shovel model can easily lead to model fragmentation, but material that is too flexible will be prone to details of tensile deformation or print breakage, which will affect accuracy and aesthetics.
The performance of the model is stable. The resin is stable in different climatic conditions and is also easy to store, overcoming the shortcomings of other resins that easily dampen softening and environmental corrosion

Parameter Information:

Main Material: Resin Monomer & Photo Initiator
Exposure parameters: lower exposure time(s) 20-60s, normal exposure time(s) 5-15s
Precautions:

Storage method:
Protect from light and store at room temperature. (The sun has a lot of UV light, will solidify the photoresist. After the test, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
Use:
Shake well before use, prohibiting the use of resin in very sunny places.
Wear gloves before use to avoid direct contact with the skin and ventilate the room.
Accidental contact, as soon as possible to use plenty of flushing water. If you don't feel well, get medical help right away.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin into the resin tank into the unused resin, do not leave the resin in the resin tank for a long time without use to prevent resin pollution from affecting the printing effect (a long time without the resin can be placed in airtight containers or sealed with plastic wrap to shade).
The resin has a shelf life of up to 18 months.