

















- Stock: 5
- Brand: IteadStudio
- Model: DZD000074
- Weight: 50.00g
- Dimensions: 74.00mm x 50.00mm x 1.60mm
- MPN: IM120417014
The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.
The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.
Hardware
Pin | OUTPUT type | Description |
D0 | NA | No Connection |
D1 | NA | No Connection |
D2 | NA | No Connection |
D3 | Digital | Button E Output |
D4 | Digital | Button D Output |
D5 | Digtal | Button C Output |
D6 | Digital | Button B Output |
D7 | Digital | Button A Output |
D8 | Digital | Button F Output |
D9 | Digital | Button G Output |
D10 | NA | No Connection |
D11 | NA | No Connection |
D12 | NA | No Connection |
D13 | NA | No Connection |
A0 | Analog | Joystick X Output |
A1 | Analog | Joystick Y Output |
A2 | NA | No Connection |
A3 | NA | No Connection |
A4 | NA | No Connection |
A5 | NA | No Connection |
GRBL
Mach3