3A PDB Distribution Module XT60 with Double BEC 5V/12V

Description :

• 56.7g copper, 4-layers &1.6mm PCB.
• Built-in XT60 Socket
• Total 6 pairs ESC solder tabs are fit for H or X type frame
• 5V & 12V Output LED indicators & Short circuit tolerant

Specifications

• Input voltage range (3S-4S LiPo operation): 9 - 18V DC
• Regulated 5V and 12V outputs
• LED power indicators ( 5V & 12V outputs )
• 6 ESC outputs & 1 pair VCC/GND pads

ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6

BEC 5V output:

• Designed for RC Receivers, Flight controllers, OSD, and Servos.
• DC/DC synchronous buck regulator.
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 2 Amps (Max.2.5A 10s/minute)
• Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
• Short-circuit tolerant (5 seconds/minute)

BEC 12V output:

• Designed for Video TX or FPV camera with linear regulator.
• The battery should be 4S LiPo (13~18V DC)
• Voltage: 12.0 +/- 0.3VDC
• Continuous current: 500mA (Max.0.8A 5s/minute)
• Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V

Size: 50 x 35 x 3mm/2 x 1.4 x 0.1 inch
Package size: 145 x 88mm/5.7 x 3.5 inch
Net Weight: 10g
Package weight: 15g