2-channel receiver 12V R2C
The réepteur R2C radio is based on a rolling code technology. and was designed to control the automation via radio signal.
This radio receiver has both channels has been manufactured according to safety standard in force by SNC ALMITECH.
- The module must be alimanté 12 to 15VDC 150mA
- Radio-frequency to:
- 120 Vac 10A
- 12VDC 20A
- selectable functions for each individual output
- Size: 72mm / 60mm
- The red LED indicates learn the correct remote lucture.
- The two relays are controlled by the A and B buttons of remote control as required.
- The two red LEDs indicate the status of each relay (closed-open)
- The relays operate in two modes:
- Pulse: jumper removed
- bistable: jumper closed
- Press the button Learn the red LED lights, release the Learn button
- Press any button on the remote quei, the red LED flashes for 5sec.
At this stage the syncronisation is complete, you can press one of the remote control buttons and the relay should corespont commuter.vous can mémoiriser and up to 32 remote controls
- In case of loss or theft of a remote control, erase all memory microcontroller.
- Press and hold down the button Learn
- Hold the button down for 10 seconds Learn juqu'à the red LED turns off.
- Release the button, the red LED clignote.Toute memory is erased.