Menu
Your Cart

2S 20A 18650 Lithium Li-Ion Battery Bms Charger Balance Protection Board

2S 20A 18650 Lithium Li-Ion Battery Bms Charger Balance Protection Board
2S 20A 18650 Lithium Li-Ion Battery Bms Charger Balance Protection Board
2S 20A 18650 Lithium Li-Ion Battery Bms Charger Balance Protection Board
2S 20A 18650 Lithium Li-Ion Battery Bms Charger Balance Protection Board
2S 20A 18650 Lithium Li-Ion Battery Bms Charger Balance Protection Board
  • Stock: 10
  • Brand: Sparkfun
  • Model: DZD000198
  • Weight: 30.00g
  • Dimensions: 180.00mm x 0.00mm x 0.00mm
  • MPN: 10.5$
650.00DA
Ex Tax: 650.00DA

Product Description

 Applicable scope: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions) Charging voltage: 8.4V - 9.0V Continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the load current use) Continuous charge current (upper limit): 10A Standard Edition: Suitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W. Balanced version: Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.

This is balance version!

Note 1: The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)

Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output. Note

3: When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.

For some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).

Write a review

Please login or register to review

GRBL


 

Mach3


 

We use Cookies
Dzduino collects cookies to enable the proper functioning and security of our websites, and help us offer you the best possible user experience, you consent to the use of these cookies.