Menu
Your Cart

DUE TO CONTAINMENT MEASURES IMPLEMENTED TO STOP THE SPREAD OF COVID-19, PARCEL DELIVERIES MAY SUFFER DELAYS.

125 kHz RFID UART reader module RDM6300

125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
125 kHz RFID UART reader module RDM6300
  • Stock: 19
  • Brand: IteadStudio
  • Model: DZD001038
  • Weight: 15.00g
  • Dimensions: 40.00mm x 28.00mm x 2.00mm
1,500.00DA
Ex Tax: 1,500.00DA

125Khz RFID Reader Module RDM6300 UART Output Access Control System for Arduino

Features:

  • Frequency: 125KHz
  • Baud rate: 9600bps (TTL RS232 format)
  • Working voltage: DC 5V (±5%)
  • Relative humidity: 0-95%
  • Working temperature: -10'C to +70'C
  • Storage temperature: -20'Cto +80'C
  • Wiring size: 46mm x 32mm x 3mm
  • Module size: 38.5mm x 19mm x 9mm
  • Supported card: EM/TK 4100, EM/TK4102, EM4200 or compatible
  • Receiving range: 20-50mm (It depends on the antenna, card and the surroundings)

Sample Code:

  • String comdata = "";
    Void setup ()
    {
    PinMode (2, the OUTPUT);
    PinMode (3, the OUTPUT);
    DigitalWrite (2, HIGH);
    DigitalWrite (3, HIGH);
    Serial. The begin (9600);
    }

    Void loop ()
    {

    DigitalWrite (2, HIGH);
    DigitalWrite (3, HIGH);
    While (Serial. The available () > 0)
    {
    Comdata + = char (Serial. The read ());
    Delay (2);
    }
    If (comdata. Length () > 0 && comdata = = "0500 addf1443")
    {
    While (comdata. Length () > 0)
    {
    DigitalWrite (3, LOW);
    Delay (100);
    While (Serial. The available () > 0)
    {
    Comdata + = char (Serial. The read ());
    Delay (2);
    }
    Comdata = "";
    }
    }
    Else if (comdata length () > 0)
    {
    While (comdata. Length () > 0)
    {
    DigitalWrite (2, LOW);
    Delay (100);
    While (Serial. The available () > 0)
    {
    Comdata + = char (Serial. The read ());
    Delay (2);
    }

    Comdata = "";
    }
    }
    }

Write a review

Please login or register to review

GRBL


 

Mach3


 

Tags: 125 , khz , rfid , uart , reader , module , rdm6300