Menu
Your Cart

ESP8285 WiFi module ESP-M3

ESP8285 WiFi module ESP-M3
ESP8285 WiFi module ESP-M3
  • Stock: 18
  • Brand: Tiah
  • Model: DZD004480
  • Weight: 8.00g
1,000.00DA
Ex Tax: 1,000.00DA

Description :

AT firmware:

This firmware only supports AT commands to operate the module.

Transparent transmission firmware:

This firmware configures the module through the web page, similar to the router configuration

 What is the ESP8285?

· ESP8285=ESP8266+1M FlashTo make it resistant to high temperatures125 degrees Celsius!And the original ESP8266 source program can be used as it is..

· The core processor of the ESP-M3 module uses the cost-effective chip ESP8285. The chip integrates an enhanced version of Tensilica's L106 Diamond Series 32-bit core processor in a smaller package with on-chip SRAM. The ESP8285 has a full Wi-Fi network function, which can be used independently or as a slave to other host MCUs. When the ESP8285 hosts an application, it can be launched directly from external Flash. The built-in cache helps improve system performance and optimizes the storage system. In addition, the ESP8285 can be used as a Wi-Fi adapter via the SPI/SDIO interface or I2C/UART port for any microcontroller-based design.

 

 

1) The volume is too small;

2) Serial port to WiFi;

3) Wireless transparent transmission;

4) Ultra-low power consumption over long distances;

5) high temperature resistance up to 125 ° C;

6) Fully compatible with ESP8266, the source code can be used as it is.

 

 

SOCcharacteristic

· Built-in Tensilica L106 ultra-low power 32-bit microprocessor with 80MHz and 160MHz frequency support, RTOS support

· Built-in TCP/IP protocol stack

· Built-in 1 10 bit high precision ADC

· Peripheral interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO

· Deep sleep keeps current at 10uA and shutdown current is less than 5uA

· Wake up, connect and pass packets within 2 ms

· Standby power consumption is less than 1.0mW (DTIM3)

· Built-in 1Mbyte SPI Flash

Wi-Ficharacteristic

· Support for 802.11 b/g/n/e/i

· Support Station, SoftAP, SoftAP+STA mode

· Support for Wi-Fi Direct (P2P)

· Supports hardware acceleration of CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC

· P2P discovery, P2P GO mode/GC mode and P2P power management

· WPA/PA2 PSK and WPS

· 802.11 i security features: pre-authentication and TSN

· Support for 802.11n (2.4 GHz)

· 802.1h/RFC1042 frame packing

· Seamless roaming support

· Support AT remote upgrade and cloud OTA upgrade

· Support for Smart Config (including Android and iOS devices)

Module peripheral

· 2xUART

· 1xADC

· 1xEn

· 1x wake-up pin

· 1xHSPI

· 1xI2C

· 1xI2S

· Up to 10xGPIOs

range of working temperature:-40°C-125°C

Module size:26.8mm*16mm

Application scenario

● Household appliances

● Home automation

● Smart sockets, smart lights

● Mesh network

● Baby monitor

● IP camera

● Sensor network

● Wearable electronics

● Security ID tag

● Wireless location awareness

● Wireless positioning system beacon

● Industrial wireless control 

Write a review

Please login or register to review

GRBL


 

Mach3


 

Tags: esp8285 , wifi , module , esp-m3
We use Cookies
Dzduino collects cookies to enable the proper functioning and security of our websites, and help us offer you the best possible user experience, you consent to the use of these cookies.