The Mini V Wheel Kit is used in conjuntion with Mini V Plate to create a small form factor linear actuator guide!
These Mini V Wheels can be used on a variety of projects and are great for use with any V-Slot Extrusion.
Each wheel is carefully milled for consistent high precision and tolerance.
- Material - Delrin (black)
- Dimensions 15.23 OD x 9.974 +/- 0.026 ID x 8.8 'thick'
- Rockwell Hardness M80
- Compressive Strengh 63Mpa
- (1) Mini V Wheel
- (2) Mini V Bearings (V3)
- (2) Mini V 1mm Precision Shim
- (1) M5 Nylon Lock Nut
Also, be sure to grab the screws and spacers of your choice here:
- Low Profile Screw (25mm for use with 1/8" Plate and 30mm for 1/4" Plates with the exception of the C-Beam Gantry Plate & Mini V Plate which uses 25mm)
- Aluminum Spacers (choose between 6mm and 1/4")
- Eccentric Spacers (choose between 6mm and 1/4")
Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers
Belt Driven Mini V example models