Description :
TheArduino Nano ESP32, a Nano format card, is based on the ESP32-S3 module integrated in the NORA-W106-10B from u-blox.
Pioneering as the first Arduino card entirely based on an ESP32, it offers Wi-Fi and Bluetooth LE connectivity.
The Nano ESP32 is compatible with theArduino IoT Cloud and supports MicroPython, making it an ideal board for getting started in IoT development.
The Nano ESP32 is fully compatible with MicroPython.
For details on how to configure and get started with MicroPython, please visit docs.arduino.cc/nano-esp32.
TheArduino Nano ESP32 is capable of executing code for other ESP32 devices without problem.
It has been specially designed to ensure total compatibility with the ESP32 ecosystem, simplifying the transfer of existing code.
The Nano ESP32 can be powered in two ways.
You can connect it via the USB port, which activates the VBUS pin as an output.
Alternatively, it can be powered via the VIN pin, accepting an input voltage range from 5 to 18 volts.
Features
MICROCONTROLLER
Xtensa® Dual-core 32-bit LX7 microprocessor
Up to 240 MHz
384 kB ROM
512 kB SRAM
16 kB SRAM in RTC (low-power mode)
DMA controller
POWER SUPPLY
Operating voltage 3.3 V
VBUS supplies 5 V via USB-C® connector
VIN range from 6 to 21 V
CONNECTIVITY
Wi-Fi
Bluetooth® LE
Integrated antenna
2.4 GHz transmitter/receiver
Up to 150 Mbps
PINS
14x digital (21x including analog)
8x analog (available in PSTN mode)
SPI(D11,D12,D13), I2C (A4/A5), UART(D0/D1)
COMMUNICATION PORTS
SPI
I2C
I2S
UART
CAN (TWAI®)
CONSUMPTION DETAILS
7 μA consumption in standby mode
240 μA consumption in energy-saving mode
RTC memory
Ultra Low Power Coprocessor (ULP)
Power Management Unit (PMU)
ADC in RTC mode
FORM FACTOR
- Dimensions: 1.8 x 4.5 cm
GRBL
Mach3
